Off-Grid Water Co.
Field Plans No. 001–003

Pull drinking water from thin air — assemble it yourself, this weekend.

Three complete, tested AWG units for turning ordinary humidity into drinking water — no utility hookup, no well, no waiting on anyone. Parts lists, wiring, dimensioned assembly steps, and troubleshooting for every climate.

Get All 3 Builds One-time — $19.99
RH 50%+ DEW PT COLLECT FIG. 1 — CONDENSATION PRINCIPLE
Why This Matters

Water security shouldn't depend on infrastructure you don't control.

Boil-water notices, well pumps that fail during outages, bugout scenarios where the tap just isn't an option — atmospheric water harvesting works anywhere there's air with moisture in it, which is almost everywhere.

3
COMPLETE BUILD METHODS,
ONE FOR EVERY CLIMATE
$55+
CHEAPEST BUILD COST,
PARTS FROM ANY HARDWARE STORE
0
SPECIALIZED TOOLS
OR PRIOR EXPERIENCE REQUIRED
Pick Your Climate

Three builds. Every one dimensioned, parts-listed, and step-numbered.

Each plan includes the full written build guide plus a numbered assembly diagram — parts labeled, steps in order, nothing left to guess at.

PLATE 01

Fog & Dew Mesh

Passive mesh net catches fog droplets that merge and drip into a gutter. No power, no moving parts.

YieldWeather-dependent
Best climateCoastal / fog
PowerNone — passive
PLATE 02

Desiccant / Solar Still

Absorbs moisture overnight, releases it under sun through a sloped condensing cover. Zero electricity.

Yield0.2–0.6 L/day
Best climateArid, sunny
PowerNone — solar
PLATE 03

Peltier Cooler Build

Thermoelectric chip pulls warm humid air below its dew point. Continuous output, scales by adding units.

Yield0.5–1.5 L/day
Best climateWarm + humid
Power12V electric
What's In The Box

Everything you need on the bench before you cut a single part.

  • Three full written build guides — fog mesh, desiccant/solar, and Peltier
  • Numbered, dimensioned assembly diagrams for every build, step by step
  • Complete parts lists with approximate costs per build
  • Maintenance schedules and troubleshooting tables for each method
  • Side-by-side comparison so you can match the build to your climate
  • Scaling notes for turning any single unit into a multi-unit array

Fog Mesh Plan

Desiccant Plan

Peltier Plan

Complete Bundle — All 3 Plans
$19.99
was $29.99
  • Instant digital download, all 3 build guides + diagrams
  • Read on any device, print the assembly sheets at the bench
  • Yours to keep and build from for life — no subscription
Get the Plans — $19.99
SECURE CHECKOUT · INSTANT DELIVERY
Questions

Before you build

Do I need any special tools or experience?
No. Every build uses basic hand tools — a screwdriver, a hot glue gun, a utility knife. If you've assembled flat-pack furniture, you can follow these plans.
Which build should I start with?
It depends on your climate — coastal or foggy areas favor the mesh harvester, dry and sunny favors the desiccant still, and warm and humid favors the Peltier build. The guide includes a comparison table to help you choose.
Is the water actually safe to drink?
Condensed atmospheric water is naturally close to distilled, but every guide includes a maintenance section covering basic filtration and cleaning steps before drinking, same as you'd use for any collected water.
How is this delivered?
Instantly, as a digital download after checkout — no shipping, no waiting. You can read it on your phone or print the assembly sheets for the workbench.